MERCRUISER 0° EXHAUST ELBOW
Exhaust elbow for Mercruiser engine with an 80mm diameter outlet.
Mounting hardware included.
Exhaust elbow for Mercruiser engine with an 80mm diameter outlet.
Mounting hardware included.
Mercruiser exhaust elbow.
Mounting hardware included.
Exhaust elbow for Mercruiser engine with an 80mm diameter outlet.
Mounting hardware included.
Thermal insulation for Yanmar exhaust elbow YM119575-13300.
Thermal insulation for Yanmar exhaust elbow YM119175-13301.
Thermal insulation for Yanmar exhaust elbow YM119778-13301.
Exhaust outlet diameter 64mm for Chriscraft exhaust manifold.
Cast iron diffuser plate for Chrscraft engine.
Exhaust elbow for Chrysler V8 engine after 1966.
Exhaust elbow for Mercruiser engines of the 8.1L GM496 and 8.2L GM502 new generation.
"Snail" exhaust elbow kit for Mercruiser diesel engines with base mounting.
For the "short" exhaust elbow, refer to reference 8M0149727 or 8M0149726 for the kit.
Exhaust elbow for Crusader engine with 100mm outlet.
Exhaust elbow for Volvo Penta 4 cylinder engines types B18 and B20.
Kit coude d'échappement Cummins des moteurs suivants :
- 6BTA5.9
- 4BTA
- 6CTA8.3
- QSL9
- 6BTA5.9
- QSB5.9
- QSC8.3
- QSB6.7
- QSB6.9
Bride à utiliser obligatoirement en complément du coude d'échappement YM119574-13530 pour une installation complète.
Note technique Cummins 4BTA - 6BTA :
- Dans le cadre du remplacement des anciens coudes disposant d'une arrivée d'eau en 1.5" / 38mm aucunes autres pièces ne sera nécessaire.
- Dans le cadre du remplacement des coudes plus récents disposant d'une arrivée plus petite en 1.25" / 32mm le rajout d'un kit de réducteur permettant de convertir le piquage d'eau sera à rajouter.
Le kit bride incluant donc :
- Bride de fixation
- Nécessaires de visserie
- Joint GC
- Joint GCS
- Collier VP25767
Pensez à rajouter le coude d'échappement et le kit réducteur si nécessaire !
Straight reducing pre-elbow allowing you to go from a diameter of 65 to 75mm.
Assembly including:
- Pre-elbow
- Necklaces
- Hose for diameter 75mm length 100mm.
Cast iron exhaust pre-elbow allowing the junction between the elbow exhaust hose and the horn exhaust hose on a Mercruiser V6 engine.
105mm round elbow side connection and oval horn side connection.
For installation with AP1520 and AP1525 hoses on engines without risers.
Can be mounted on a V8 engine block.