SEAL REAR CRANKSHAFT GM 4-6-8 CYL 1 PCS - LH
Rear vilebrequin joint including mounting required for multi-engine base GM 4 cylinders, V6 and V8.
For mounting with a slight sticker on the joint you refer to reference 5512.
Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
Rear vilebrequin joint including mounting required for multi-engine base GM 4 cylinders, V6 and V8.
For mounting with a slight sticker on the joint you refer to reference 5512.
Hydraulic pushers with a roll to follow the lobes of the camshaft.
Unlike RHT817 chicks which are flat.
Exhaust valve for GM Vortec type engines with a single keyway.
head diameter 38.2mm
tail diameter 8.8mm
height 125mm
Set of segments for a standard size piston on GM or Ford base engines with a bore of 101.60mm.
Height segments: 2 - 2 - 4.8mm
Pièce non en stock.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Universal triangular mating with 26 cannelures.
Small 32.5cm outer diameter flywheel for mounting on Volvo Penta engines after 1988 with one piece crankshaft seal and 153 teeth ring gear.
Flywheel generally used on Volvo petrol engines when mounted with 280-290 baseplate.
Example AQ205 - 271 ...
Set of pads for a standard gauge of diameter 53.34mm and width 21.3mm.
Attention for the recent GM181 4-cylinder engines with a width of 19mm, please refer to the reference 23-804982.
Repackaged V8 small engine type block 5 litres or 5.7 litres.
Seawater suction pump with 3 BTR screw attachment at the end of vilebrequin.
Characteristics :
- Turbine height 32mm
- Outputs diameter 32mm
Fixing screw 3 pcs: 800047B
Mounting pattern: VP826421
Chicken at the end of the vilebrequin 2 throats.
Front Damper for mounting at end of vilebrequin with a diameter of 170mm.