ZR MANIFOLD STUD

Compatibilité inconnue ou non renseignée, Contact us
Voir les produits compatibles
Produit compatible
V-DRIVE Power Plus / renvoie d'angle PCM uniquement en ratio 1.48:1 à compléter avec l'inverseur série IRM80 pour obtenir un ensemble complet.
Le replacement des anciennes générations peut nécessiter le changement des supports.
2 bidons d'huile R190251 sont nécessaires.
Cut-out cooling connection 90° male - male for Crusader collectors of types : 97993 - 97992 - 97753 - 97752
Filetage: 1'
Durite : 32mm 1-1/4"
For assembly with purge see reference 30624.
IRM80-type PCM reversor with a ratio of 1.23/1 and an electrical inversion control.
Full reverse of Velvet Drive - Borg Warner type 71C with a ratio of 1/1.
Application GM small block.
Fixing bolt for reverser.
Engine coupling with 15 cannels replacing the old PCM Power plus 1.23 and PCM 1:1.
Characteristics:
- 15 cannel
- External diameter: 335mm
- Internal diameter: 25mm
- Height: 31mm
New generation of PCM damper in replacement of former generation triangular type mating ( R140016 and R140016A) on PCM IRM40A reverser.
For Borg Warner - Velvet drive reverse mountings refer to the reference 14001 with 26 cannelures.
6L and 6.2L PCM engine coupling, CRUSADER , INDMAR.
IRM80-type PCM reversor with a ratio of 1.1/1 and an electrical inversion control.
Installation planned for live output or some Walter brand V-DRIVE.
IRM80 PCM reversor with a ratio of 1.1/1 and a mechanical inversion control.
Planned mounting for PCM type V-DRIVE.
Oil temperature sensor 230°F for Velvet drive, Borg warner.