Complete PCM ZR409 engine pack.

Non-catalyzed assembly with or without transmission depending on factory availability.

For more information please contact us

Power pack Mercruiser reconditioned 383 MPI 350HP for mounting in Mercruiser base.

All SÉRIE-PLUS engines are fully reused to nine.This is an original Mercury Marine OEM piece that includes exhaust collectors, electrical and ignition systems, so that it is ready to be installed directly in a boat.

This 350HP engine features a 261 Kilowatts at the wheel with a maximum speed (WOT) of 4800-5200 and a compression ratio:9.0:1.

The recommended oil is Mercury MerCruiser Synthetic Blend 25W-40, classified NMMA FC-W with a tolerance to fuel and ethanol: 87 octane / up to 10% ethanol.

Motor systems MerCruiser 383 MPI 350HP for mounting in base:

- Engine control: ECM 555 with cliquetis control and vilebrequin activation,

- Fuel supply: GEN II Cool Fuel with overpower pump,

- Fuel injection: Multipoint electronic injection (MPI),

- Admission: Long channel admission in two parts with 75 mm butterfly body,

- Escape: Hot iron collector coated with electrodeposition paint with dry seam elbow,

- Water drain: Multi-point copper,

-Accessories training: snake belt,

- Lubrication: 100 psi high-speed oil pump.

Mercury Remanufacturing engines have a one-year limited factory warranty.

6-litre bobtail engine pack without direct sea water cooler without catalysts.

Reconditioned engine block GM496 8.1 litres type HO.

Engine base including all carters, distribution, oil.

Perfect product for replacing your Mercruiser engine, Volvo penta ...

The engine reconditioning incorporates the rectification, machining, replacement and control of all key elements to provide you with a marine engine block that can replace your old mechanics.

Reconditioned engine block GM496 8.1 litres no HO.

This type of block being not on stock in contrast to HO bases please contact us directly for any information.

Perfect product for replacing your Mercruiser engine, Volvo penta

The engine reconditioning incorporates the rectification, machining, replacement and control of all key elements to provide you with a marine engine block that can replace your old mechanics.

Engine block reconditioned in standard rotation for base GM V8 7.4 liters L29.

Features :

- Rear crankshaft oil seal in one piece

- GM454 generation VI engine base

- Oval intake passages

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Roller pushers

- 6 fixing screws for the timing cover

- L29 type cylinder heads (firm passages on the intake)

- 4 bolts per crankshaft bearing

Engine including:

- Rocker cover (G6 type aluminum)

- Sheet metal oil pan

- Timing cover

- Damper before

- Intake and exhaust gaskets

Perfect product for replacing your Mercruiser, Volvo, Crusader engine

Engine reconditioning integrates the rectification, machining, replacement and control of all the key elements in order to provide you with a marine engine block capable of replacing your old engine.

Engine including superior quality internal parts to meet marine requirements.

Engine including superior quality internal parts to meet marine requirements.

Reconditioned engine block after 1990 for GM V8 7.4 litres base

Characteristics :

- Rear spi of vilebrequin in one piece

- GM454 generation VI engine base

- oval intake passages

- Standard rotation: ignition 1-8-4-3-6-5-7-2

- Rollers

- 4 bolts per vilebrequin bearings

- 6 fixing screws for distribution.

- Culasses with central drilling in the middle of the admission (NON L29)

We usually replace MARK V motor bases with flat pushers by MARK VI roller pushers.

Perfect product for replacing your Mercruiser engine, Volvo, Crusader.

The engine reconditioning incorporates the rectification, machining, replacement and control of all key elements to provide you with a marine engine block that can replace your old mechanics.