METAL FUEL FILTER BOWL

Mapping head for GM engine in line with Velvet drive - Borg Warner series 71 or 72 with a 26-gun coupling.
Mounting the starter in high position or along the oil crankcase.
Engine support with the following characteristics:
Entraxe 100mm with
16mm net.
Support height 47mm
threaded stem height included 70mm.
For a 19mm threaded rod see reference 66284A2.
Solenoide for large DR9597 or ST70 type starter.
2 lengths of solenoid exist:
- Short height 8 cm for the body
- Long height 10 cm for the body
Information to be specified when buying.
Original bronze thermostat Crusader 143°F.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Specific screws for aluminium 96626 and 98008.
15 pcs.
Oil filter holder for GM V6 and V8 base engines being installed on the low engine with 2 screws.
80PSI oil pressure probe with 1/8-27 thread
Oil pump for motor V6 - V8 base GM non Vortec with a 16mm diameter thorn.
Plastic gasoline filter in the Rochester 2 and 4 bodies of 29mm length.
Prestolite illuminator doigt.
Base carburettor joint for Mercab and Rochester mounting with centreline 50x85mm, thickness 2mm.
Basic carburetor joint Rochester 4 body with centreline 110 x 145mm, thickness 2mm.
Repacked motor block in standard LH rotation before 1990 for base GM V8 5.7 litres with 12 attachment screws for intake pipe.
Characteristics :
- Rear spi of vilebrequin in 2 pieces
- 12 attachment screws for intake pipe
- Cache asbuteurs fixation extérieur
- Standard rotation: ignition 1-8-4-3-6-5-7-2
- drilling for the gas pump axis
Perfect product for replacing your Crusader, Mercruiser, Volvo, WTO ...
The engine reconditioning incorporates the rectification, machining, replacement and control of all key elements to provide you with a marine engine block that can replace your old mechanics.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Repacked engine block in reverse HR before 1990 for GM V8 5.7 litres base with 12 attachment screws for intake pipe.
Characteristics :
- Rear spi of vilebrequin in 2 pieces
- 12 attachment screws for intake pipe
- Cache asbuteurs fixation extérieur
- 2 pinion kit for distribution (without chain)
Reverse rotation: ignition 1-2-7-5-6-3-4-8
- drilling for the gas pump axis
Perfect product for the replacement of your Crusader 350 - 327, Chriscraft ,RIVA...
The engine reconditioning incorporates the rectification, machining, replacement and control of all key elements to provide you with a marine engine block that can replace your old mechanics.
Rochester 4-body carburettor brass float.
Complete repair kit for carburettor Rochester 4 body - quadrajet.
Starter including centrer and locking bolt for V6 and V8 GM before 1990.
Smooth ulbuter with no guides at the level of connection with the culbuter rod.
For mounting after 1990 with guide you refer to the reference R973.