GM CONNECTING ROD BEARINGS - 0.20
Set of pads for a side-by-sided support 0.50mm , width 21.3mm.

Set of pads for a side-by-sided support 0.50mm , width 21.3mm.
Set of pads for a double sheath repair 0.75mm, width 21.3mm.
Set of pads for a standard gauge of diameter 53.34mm and width 21.3mm.
Attention for the recent GM181 4-cylinder engines with a width of 19mm, please refer to the reference 23-804982.
Hydraulic powder flat.
Electronic igniter for standard LH V8 Motor with a carburettor.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Brush pump for water circulation in the engine block.
Planned assembly for V6 - V8 motor with a sheet metal or plastic distribution cardr.
Fixed by 4 screws above the distribution cardr.
TE91112 winding joints included.
For V6 Vortec engines with an aluminium distribution system only you refer to the W898N reference.
Motor low pouch for GM small block before 1990 with a 4-piece oil carter seal.
Base joint for Holley 4 body carburettor with 110-130 x 145mm, thickness 2mm.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Gas pump lid joint.
Bride to keep all GM engines illuminated.
Résistance universelle 1.5ohms.
Oil filter height 13 cm - 13/16 X 16NPT
For an oil filter height 8 cm you refer to the reference R134.
Sherwood Sea Water Pump Kit for Crusader Engine with E35 Type Pump.
Platinum screw for Mallory brand lighter.
Condenser for Mallory brand lighter.
Mallory brand ignition doigt.
Mapping head for GM engine in line with Velvet drive - Borg Warner series 71 or 72 with a 26-gun coupling.
Mounting the starter in high position or along the oil crankcase.
Engine support with the following characteristics:
Entraxe 100mm with
16mm net.
Support height 47mm
threaded stem height included 70mm.
For a 19mm threaded rod see reference 66284A2.
Solenoide for large DR9597 or ST70 type starter.
2 lengths of solenoid exist:
- Short height 8 cm for the body
- Long height 10 cm for the body
Information to be specified when buying.
Original bronze thermostat Crusader 143°F.