MERCRUISER MPI CLOSED EXHAUST ELBOW GASKET
Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with 2 closed passages.

Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with 2 closed passages.
Exhaust pipe 17 cm for Mercruiser engine with the new installation with the Dry outdoor water passages.
Equipment required.
The default elbow joint is 27-864850A02.
Height of the elbow to be confirmed on your engine- exists in height of 21cm under the reference MC20864591.
21cm Exhaust Coude for Mercruiser engine with the new installation with Dry outdoor water passages.
Equipment required.
The default elbow joint is 27-864850A02.
Height of the elbow to be confirmed on your engine- exists in height of 17cm under the reference MC20864309.
Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with an open and closed passage.
Exhaust elbow joint for Mercruiser engine with new cooling assembly with DRY external water passages.
Joint with two open passages.
Higher V6 V8 thermostat housing.
Kit of 2 closed elbow joints for Mercruiser motor with a temperature exchanger.
For the rigid stainless steel plate you refer to the reference MC2087918.
Exhaust collector for machine Mercruiser V6 old mounting.
Equipment required.
Demandez le délai de réapprovisionnement et le tarif en cliquant sur le bouton « Ask for a quote ».
Un conseiller traitera votre demande dans la journée.
Exhaust pipe for Mercruiser V6 or V8 motors.
Equipment required.
Exhaust elbow for Mercruiser V8 engine with an 80mm diameter elbow.
Mounting kit included.
Exhaust collector for Mercruiser V8 BB GM454 and GM502.
Equipment required.
Exhaust elbow for Mercruiser engine with an 80mm diameter outlet.
Mounting kit included.
Mercruiser exhaust pipe.
Equipment required.
Mapping head for GM engine in line with Velvet drive - Borg Warner series 71 or 72 with a 26-gun coupling.
Mounting the starter in high position or along the oil crankcase.
Engine support with the following characteristics:
Entraxe 100mm with
16mm net.
Support height 47mm
threaded stem height included 70mm.
For a 19mm threaded rod see reference 66284A2.
Entretoise positioning between the elbow and the exhaust manifold of the WTO 4-cylinder 2.5L and 6-cylinders online 165cv to adapt the water passages.
Exhaust pipe for the WTO 4 and 6-cylinder engine up to 1993.
4-cylinder GM153 - 2.5 litres and GM181 - 3 litres before 1990.
Exhaust elbow joint at the end of the collector on the WTO V6 engine type GM229 of 3.8 litres.
Wing plate for old-generation round WWTO exhaust collector type V6 or V8.
Starboard plate for old-generation round WTO exhaust collector type V6 or V8.
WCO 4-cylinder type 120CV - 2.5 liters and 140CV - 3 liters before 1990.
WTO 4- and 6-cylinder collector plate of type 2.5 liters GM153, 3 liters GM181 and GM250 with a watershed.